
HIKVISION | DS-3E1309P-EI/M 8-Port Smart PoE Switch
Tax included! This product can't be ordered online at this time. This product can only be purchased in-store.
Description
Built for modern surveillance environments, the 8 Port Fast Ethernet Smart PoE Switch delivers dependable network performance, intelligent management features and efficient power distribution in one streamlined solution. Designed for IP cameras and security systems, its robust metal housing, advanced PoE watchdog technology and long-range transmission capabilities provide stable connectivity across demanding installations. With VLAN support, surge protection and remote management integration, every connection remains secure, organised and ready for uninterrupted monitoring.
Specifications
General
- Housing material: Metal
- Cooling design: Fan-free
- Installation options: Desk-mounted or wall-mounted
- Dimensions (W × H × D):
170 × 27.6 × 93.1 mm
(6.69 × 1.09 × 3.67 in) - Net weight: 0.4 kg (0.9 lb.)
- Gross weight: 0.9 kg (2.0 lb.)
Power & Protection
- Power supply: 54VDC, 1.2A
- Maximum power consumption: 65W
- Idle power consumption: 5W
- Surge protection: 6 kV
Operating Conditions
- Operating temperature:
0°C to 40°C
(32°F to 104°F) - Storage temperature:
-40°C to 85°C
(-40°F to 185°F) - Operating humidity: 5% to 95% non-condensing
- Relative humidity: 5% to 95% non-condensing
Network Parameters
- Ports:
- 8 × 10/100 Mbps PoE ports
- 1 × Gigabit RJ45 port
- MAC address table: 8K
- Internal cache: 4 Mbits
Switching Capacity
- Whole-device performance: 5.6 Gbps
- Port performance: 3.6 Gbps
Packet Forwarding Rate
- Whole-device performance: 4.17 Mpps
- Port performance: 2.68 Mpps
Smart Features
Long-Range PoE Transmission
- Ports 1–8 support transmission distances of up to 300 m
Performance may vary depending on cable quality and camera model.
PoE Watchdog
- Automatically detects and restarts unresponsive cameras connected to ports 1–8
Port Isolation
- Ports 1–8 support isolation mode for improved network security
- Isolated ports remain able to communicate with ports outside the isolation group
VLAN Support
- Supports IEEE 802.1Q VLAN
- Configurable VLAN IDs from 1–4094
- Supports Trunk and Access port modes
- Maximum VLAN capacity: 4094
Loop Prevention
- Supports IEEE 802.1D STP
- Supports IEEE 802.1w RSTP
System Management
- Web-based device management supported
- DHCP client enabled by default for automatic IP assignment
- Super IP fixed address support: 10.180.190.200
- Remote management supported through Hik-Central Pro and Hik-Partner Pro
Hik-Partner Pro Functions
- Port rate monitoring
- Bandwidth utilisation monitoring
- PoE power monitoring
- Topology display
- Alarm status monitoring
- Remote port and device restart
- Remote firmware upgrades
- Long-range mode activation
Additional Maintenance Features
- Cable fault and cable length detection
- Port mirroring for diagnostics
- IEEE 802.1ab LLDP peer device discovery
PoE Power Supply
- PoE standards supported:
- IEEE 802.3af
- IEEE 802.3at
- PoE ports: Ports 1–8
- Maximum port power: 30W
- Total PoE power budget: 60W
PoE Power Pin Configuration
- 1/2 (-)
- 3/6 (+)
- 4/5 (+)
- 7/8 (-)
Certifications & Compliance
EMC
- CE-EMC
- EN 55032:2015+A11:2020
- EN IEC 61000-3-2:2019
- EN 61000-3-3:2013+A1:2019
- EN 50130-4:2011+A1:2014
- EN 55035:2017+A11:2020
Safety
- CB
- IEC 62368-1:2014 (Second Edition)
- CE-LVD
- EN 62368-1:2014+A11:2017
Environmental Compliance
- CE-RoHS (2011/65/EU)
- WEEE (2012/19/EU)
- REACH Regulation (EC) No.1907/2006